Dimensions Avaliable : | 4”x2”x 2”, 5”x2”x 2”, 6”x2”x 2”, 7”x3”x 3”, 8”x3”x 3” Note: Also customized at any size. |
| Material of construction | 16 Gauge (1mm) galvanized sheet with 70 - 80 micron epoxy powder coating. Fully molded with 4 - 5mm Fibre Re-enforced Plastic Resin Material (FRP) – Acid & Fire Proof |
| Door | Single vertical, sliding, 5mm Toughened glass door |
| Ducting | Rigid ducting of FRP of 150mm dia, 4mm thick FRP Pipe. |
| Powered By | 1⁄4 HP, 1440 RPM, 1 Phase Centrifugal Blower & Motor of Flame Proof. |
| Baffle | A Stable, Non adjustable baffle with a single slot on the back baffle to aid in distributing the flow of air into and through the hood .The baffle shall be spaced out from the back liner and shall be removable for cleaning |
| Impeller | Dynamically balanced FRP Impeller. |
Centrifugal blower | Silent high efficiency remote blower consisting of continuous rating motor and chemical resistant impeller . |
| Sash | The sash shall be of Vertical rising frame .The bottom of sash frame shall have a full length handle. The sash shall be counter balanced with weights to prevent tilting and binding during operation .suction capacity : 800-1000CFM |
| Bottom Arrangements | 18 Guage galvanized sheet with epoxy powder coating. |
| Color | Standard - Ivory/Blue, can also be customized as required. |
| Worktable | Worktable: 18 ± 1mm thick black granite top. |
| Amenities | 1 No .4 Feet CFL Tubes of 20 Volts will be provided. The hood superstructure fully wired it also has 2 No’s Electrical sockets and switches (230V,5/15A,50Hz). For easy access of cables from fume hood to electrical sockets. |
| Oval sink dimension | 10” x 3”, can also be customized as required |
Features :